Darn - Forgot to ask 1 other question- The 3 Encoder wire jackets includes a shield wire w/ foil wrap Do you usually put the Shield of the cable to power GND or chassis ground? TIA.
Jeff.
DC-AIO and cable shields. To Machine chassis ground?
Moderator: cnckeith
-
countryguy
- Posts: 86
- Joined: Sat Dec 27, 2014 4:53 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: DC-AIO and cable shields. To Machine chassis ground?
Solder the shields to the outer shell of the DE9 connectors. That will connect them to chassis ground.
-
countryguy
- Posts: 86
- Joined: Sat Dec 27, 2014 4:53 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: DC-AIO and cable shields. To Machine chassis ground?
Thank you very much for the speedy reply's here and on CNCZone! You guy's are awesome!
CG.
CG.