cnc oak

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
noreenpeter
Posts: 4
Joined: Wed Aug 03, 2022 1:47 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: c163286
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

cnc oak

Post by noreenpeter »

MPU fails to initializing when computer is booted up. Then i get a time out mpu not responding. then it boots back out
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: cnc oak

Post by tblough »

Check to make sure you have power to the Oak. Are there any numbers listed in the LED display on the Oak? Is the decimal point flashing on the LED display?
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply