cnc oak
Moderator: cnckeith
-
noreenpeter
- Posts: 4
- Joined: Wed Aug 03, 2022 1:47 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: c163286
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
cnc oak
MPU fails to initializing when computer is booted up. Then i get a time out mpu not responding. then it boots back out
-
tblough
- Posts: 2852
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: cnc oak
Check to make sure you have power to the Oak. Are there any numbers listed in the LED display on the Oak? Is the decimal point flashing on the LED display?
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.