Page 1 of 1

centroid m15-9

Posted: Tue Sep 06, 2022 10:34 am
by philroy5033
Hello I have a Centroid m15-9 control panel with a problem.
Upon power up the EV backlight comes on but nothing else happens.
I looked at the power supply and all voltages are within spec.
It looks as though the main computer board is dead.
Does Centroid fix old units or is there a third party repair shop?
Any suggestions on trouble shooting would be accepted and helpful.

Your,
Phil;

Re: centroid m15-9

Posted: Tue Sep 06, 2022 1:01 pm
by cncsnw
Ed Tremblay at East Coast EDM has been tackling repairs on these units recently.

https://eastcoastedmmachine.com/centroi ... repairs-2/