Centroid CNC12, CNC11 & CNC10 Manuals

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

diycncscott

Centroid CNC12, CNC11 & CNC10 Manuals

Post by diycncscott »

updated by cnckeith 6-17-19

CNC12 Operators Manuals

CNC12 Centroid Operators Manuals

https://www.centroidcnc.com/centroid_di ... nuals.html

newbie Centroid PLC programming video series..
https://www.youtube.com/watch?v=7WiEJiQ ... i2WKIedQlQ

How to add a simple safety switch input to a PLC program
https://www.centroidcnc.com/dealersuppo ... ds/314.pdf

CNC12 PLC programming manual http://www.centroidcnc.com/centroid_diy ... manual.pdf

PLC Detective users guide.
https://www.centroidcnc.com/downloads/c ... kstart.pdf


MPU11/CNC11 Centroid Operators Manuals:

CNC11 v3.16 Mill Operators Manual
CNC11 v3.16 Lathe Operators Manual

CNC11 Windows 10 Setup Video:
https://youtu.be/Akmw8ak_TlM

CNC11 PLC Programming Manual:
http://www.centroidcnc.com/dealersuppor ... Manual.pdf
diycncscott

Centroid CNC11 Install Manuals - MPU11 systems

Post by diycncscott »

ALLIN1DC
centroid CNC11 ALLIN1DC Install Manual
http://www.centroidcnc.com/downloads/ce ... manual.pdf

Oak:
centroid Oak Centroid CNC11 Installation manual
http://www.centroidcnc.com/downloads/ce ... manual.pdf

MPU11/GPIO4D:
centroid MPU11/GPIO4D Centroid CNC11 Installation manual
http://www.centroidcnc.com/downloads/MP ... Manual.pdf

DC3IOB:
centroid MPU11/DC3IOB Centroid CNC11 Installation Manual
http://www.ajaxcnc.com/tech/downloads/m ... nstall.pdf
bloomingtonmike
Posts: 114
Joined: Wed Sep 11, 2013 1:31 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 0916130849
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Post by bloomingtonmike »

Centroid Rotary Table - RT-150
Attachments
RT-150_100111.pdf
(1.3 MiB) Downloaded 1478 times
Mikie in Bloomington IL
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Post by cnckeith »

fyi.. all the latest Oak and ALlin1DC system schematic sets, installation and operator manuals are here.
http://www.centroidcnc.com/operator_manual.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Post by tblough »

Is there an OAK velocity mode install manual like the one for the MPU11/GPIO4D?
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Post by cnckeith »

yes..found on this page..http://www.centroidcnc.com/operator_manual.html
check out the oak schematics as well on same page
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Centroid CNC11 & CNC10 Operator Manuals

Post by tblough »

I keep most of my manuals on a tablet for reference and it's a lot easier to navigate if they have TOCs and hyperlinks. So, I went through the CNC11 lathe manual and added those. [strike]Still working on the Mill manual (although I have an older 3.14 version with links if anyone is interested.)[/strike]
{EDIT} TOC and Links added to 3.16 Mill manual attached
Attachments
centroid-cnc11-v316-MillManual.pdf
(14.34 MiB) Downloaded 568 times
centroid-cnc11-v316-LatheManual.pdf
(10.55 MiB) Downloaded 485 times
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: Centroid CNC11 & CNC10 Operator Manuals

Post by cncsnw »

Tom,

Thank you for the effort on this. The manual files are much nicer that way.

What software tool did you use to add the TOC and links?
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Centroid CNC11 & CNC10 Operator Manuals

Post by tblough »

Marc,

I used AutoBookmark from Evermap.

https://www.evermap.com/autobookmark.asp

It makes it easier, but still a lot of work.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Fredsan
Posts: 72
Joined: Wed Sep 27, 2017 3:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: The Netherlands

Re: Centroid CNC11 & CNC10 Operator Manuals

Post by Fredsan »

Just saw this topic, and downloaded the milling manual with bookmarks.

Maybe you should post this also in the Acorn section, I expect many more Acorn users appreciate the bookmarks.

This makes searching the manual so much easier :D
Post Reply