SOFTWARE M400S

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
LRoberto84
Posts: 1
Joined: Mon Jul 04, 2022 1:40 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 407JGHP10
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes

SOFTWARE M400S

Post by LRoberto84 »

HI , i need the software for Centroid Control Console M400S , but the compact flash is damaged and need for viwa VF3KM400s, can you helpme please?
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: SOFTWARE M400S

Post by cnckeith »

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
vestes
Posts: 3
Joined: Wed Sep 21, 2022 5:00 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 20541
DC3IOB: No
CNC12: No
CNC11: Yes
CPU10 or CPU7: No

Re: SOFTWARE M400S

Post by vestes »

Help, I have a M400S, Serial Number 20541 that was upgrade a few years back to the newer operating system. No more compact flash card, now has an 250G SSD that I purchased from Centroid CNC. For some reason the system will not boot up, it hangs on a screen that says "Booting Desktop ---2.6.31.5-0.1". Then it just sits there and never boots up. Any ideas, do I need to send my SSD back to be a reformat? I need to get this grizzly mill back up and running.
Post Reply