4th axis disable on wireless MPG

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
repauli1
Posts: 156
Joined: Thu Jul 09, 2020 9:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

4th axis disable on wireless MPG

Post by repauli1 »

Report attached. Oak M400
Is there a easy was to disable the 4th axis selection on the left rotary knob on the wireless MPG? I have 4th slaved to 2nd axis, and if inadvertently selected and jogged, throws gantry in bind, and faults 4th axis drive.
Thanks
Bob
Attachments
report_0008DC111213-0610200966_2022-06-30_15-39-34(1).zip
(3.74 MiB) Downloaded 28 times
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: 4th axis disable on wireless MPG

Post by cncsnw »

Change Parameter 218 from 15 to 7.
repauli1
Posts: 156
Joined: Thu Jul 09, 2020 9:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 4th axis disable on wireless MPG

Post by repauli1 »

Thanks!
Post Reply