Screen display

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

alansneb
Posts: 17
Joined: Fri Jun 24, 2022 6:01 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6750
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes

Re: Screen display

Post by alansneb »

it is strange as the control was fine before I changed the date and time and screen resolution {all be it too large for the screen}
alansneb
Posts: 17
Joined: Fri Jun 24, 2022 6:01 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6750
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes

Re: Screen display

Post by alansneb »

41AE5A6D-4BD2-40E2-BF97-C3FC4F30BBF3.jpeg
Ok , so I managed to load the language MSG file and it all looked good , it got past that screen and I thought it was going to be ok… however it’s now stuck on this screen.. can you help again please … many thanks
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: Screen display

Post by cncsnw »

You appear to have more than one corrupted or deleted file.

You can download a complete CNC7 v8.23 update diskette from http://www.cncsnw.com/823_823.zip

Unpack it onto a floppy disk, making sure that you have "ZIPFILES" and "INTERCON" subdirectories when it is unpacked. Then install it by typing at the C:\CNC7 prompt:

Code: Select all

A:INSTALL
alansneb
Posts: 17
Joined: Fri Jun 24, 2022 6:01 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6750
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes

Re: Screen display

Post by alansneb »

Worked absolutely perfect , thank you so much for all your help 👍
Post Reply