OAK E stop - somehow setup for NO switch

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
mbam
Posts: 8
Joined: Wed Sep 05, 2018 9:40 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: 0925180673
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

OAK E stop - somehow setup for NO switch

Post by mbam »

I'm finally getting back on a project I started 3 years ago and am completing my wiring.

Somehow the E stop is set up for a NO switch. I have a good feeling I changed it 3 years ago and cannot figure out where to change it back.
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: OAK E stop - somehow setup for NO switch

Post by cncsnw »

You probably inverted INP11 using Ctrl-Alt-i on the Alt-i diagnostic screen.

Without a Report, though, that is just idle speculation.
mbam
Posts: 8
Joined: Wed Sep 05, 2018 9:40 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: 0925180673
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: OAK E stop - somehow setup for NO switch

Post by mbam »

Bingo that was it

Forgot all about that

On to the next

Thanks!!
Post Reply