No pendant or touch screen how do I toggle MPG
Moderator: cnckeith
-
- Posts: 14
- Joined: Tue Jan 04, 2022 2:29 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0008dc111213-1119212671
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
No pendant or touch screen how do I toggle MPG
I broke the touch screen but I want to test the encoder I am using for the handwheel. I don't see a hotkey to toggle the MPG, do I need to edit the PLC program to have a way of toggling the MPG?
-
- Posts: 3072
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: No pendant or touch screen how do I toggle MPG
The MPG can be toggled on/off either from the physical operator control panel if installed, or the VCP. You do not need to edit the PLC.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Re: No pendant or touch screen how do I toggle MPG
Use a mouse to click on the VCP button.