I have something odd happening that I can't put my finger on.
The machine has been running fine for years with no issues, then out of the blue I am getting random oscillation and position errors on the X axis. I looked at the encoder and see nothing obviously wrong with it, not sure if a worn belt could cause it.
Nothing has been changed, settings or otherwise. Before I go pulling my hair out trying to figure this out, I thought I would ask here.
Any help on where to look to solve this will be appreciated.
Thanks
X Position error
Moderator: cnckeith
Re: X Position error
Will,
Please post or send a current report.zip to tech@ajaxcnc.com
A worn belt would not cause tuning problems unless the encoder was mounted on the ballscrew instead of the motor.
Please post or send a current report.zip to tech@ajaxcnc.com
A worn belt would not cause tuning problems unless the encoder was mounted on the ballscrew instead of the motor.