Haas HL2 Lathe Conversion Using Oak
Posted: Fri May 13, 2022 12:27 pm
We have an 1998 Haas HL2 and converting it over with Oak controls. The lathe has a 10 tool changer turret that controlled with a servo that changes with an encoder count with a pneumatic cylinder that locks it in position. The chuck is hydraulic controlled by two solenoids for clamp and unclamp. The electrical print we got (filename S140808) is for a limit style turret tool changer. Since this is a common shop lathe is there a program pre written to cater to this machine exactly so the turret, hydraulics, etc are set up on the MPU12?