Haas HL2 Lathe Conversion Using Oak

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Posts: 1
Joined: Fri May 13, 2022 11:56 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: A901083
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Haas HL2 Lathe Conversion Using Oak

Post by pattersondrew30 »

We have an 1998 Haas HL2 and converting it over with Oak controls. The lathe has a 10 tool changer turret that controlled with a servo that changes with an encoder count with a pneumatic cylinder that locks it in position. The chuck is hydraulic controlled by two solenoids for clamp and unclamp. The electrical print we got (filename S140808) is for a limit style turret tool changer. Since this is a common shop lathe is there a program pre written to cater to this machine exactly so the turret, hydraulics, etc are set up on the MPU12?
Post Reply