KP-3 Touch Probe and TT-4 Tool Touch off are Back in Stock

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

KP-3 Touch Probe and TT-4 Tool Touch off are Back in Stock

Post by cnckeith »

Happy to announce that the KP-3 Touch Probe and TT-4 Tool Touch off are Back in Stock (with an updated internal design for improved longevity)

https://www.centroidcnc.com/centroid_di ... probe.html

https://www.centroidcnc.com/centroid_di ... choff.html

If you have an older KP-3 will will upgrade it for your for free see details here. Any serial number below #1230 is eligible.
https://www.centroidcnc.com/centroid_di ... ogram.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply