V2XT Pneumatic Speed Control with Allin1DC
Posted: Thu Apr 28, 2022 7:02 pm
I converted a Bridgeport V2XT to Allin1DC controls myself a few years ago, using a VFD to control the speed. It works great, but given it only has 2HP, at low RPMs, it really lacks power, especially around 2000 RPM. It's really unusable on steel between 400 and 2000. I was browsing when I noticed this machine has an M400S controlling the original pneumatic speed control:
http://www.cncsnw.com/BridgeportV2XT.htm
Is it possible to ditch the VFD and just control the speed as it was originally with my Allin1DC?
I'd like to find out how, I did the conversion myself, but it was several years ago so I'm a bit rusty on how everything is set up...
Thanks,
Noah
http://www.cncsnw.com/BridgeportV2XT.htm
Is it possible to ditch the VFD and just control the speed as it was originally with my Allin1DC?
I'd like to find out how, I did the conversion myself, but it was several years ago so I'm a bit rusty on how everything is set up...
Thanks,
Noah