Sorry if this is answered somewhere else, but I’m cutting a large block of aluminum right now and I don’t know how to change the scale of the left-hand Z Depth graphic. I’m ramping down slowly over a few mm but the display is scaled to 30mm.
Z Depth Graphic
Moderator: cnckeith
-
- Posts: 32
- Joined: Wed Feb 19, 2020 11:49 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0818141095
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Z Depth Graphic
Lagunmatic 250
-
- Posts: 3122
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Z Depth Graphic
The scale is based on the max to min Z values in your program.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.