Update controls on Hendricks 2008 CNC
Moderator: cnckeith
-
tblough
- Posts: 3102
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Update controls on Hendricks 2008 CNC
Amazingly, Centroid actually includes a menu button to access the manual: F5 CAM / F4 Manual.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
DAYTRIP
- Posts: 43
- Joined: Thu Nov 25, 2021 10:45 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Update controls on Hendricks 2008 CNC
Sent Cncsnw an email on this.
Got the machine running and actually cut a product part, foam core for fiberglass composite. Also cut a mold shape out of mdf. The mdf part is basically a circle and has 3 degrees of taper. On the mdf part it is way out of round. 10-5/16” across one axis and 10-9/16” across (90 degree to first axis).
On the foam core I utilize a puzzle joint and the puzzle is not symmetric. They are supposed to have .25” radiuses which matches the tool radius. Also appear to be slightly off linearly. We adjusted the motor travel but I feel we need to do more?
Got the machine running and actually cut a product part, foam core for fiberglass composite. Also cut a mold shape out of mdf. The mdf part is basically a circle and has 3 degrees of taper. On the mdf part it is way out of round. 10-5/16” across one axis and 10-9/16” across (90 degree to first axis).
On the foam core I utilize a puzzle joint and the puzzle is not symmetric. They are supposed to have .25” radiuses which matches the tool radius. Also appear to be slightly off linearly. We adjusted the motor travel but I feel we need to do more?
- Attachments
-
-