Shuts down / restarts on it's own

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
RAYMECI
Posts: 3
Joined: Thu Jan 13, 2022 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 0914182035

Shuts down / restarts on it's own

Post by RAYMECI »

CNC12-D Mill v4.12 on a Inspiron 3475 AIO Series

Sys ID: 0914182035

I only have the computer at this time, so the software will not boot with out the ALLIN1DC board, hence I don't have the report. I do have plenty of pics from a previous visit to the customer.

This has been an issue for months now, intermittently shuts down and restarts on its own.

Paid a dealer $1400 to say nothing is wrong.

I reinstalled and turned on the Windows boot log and it revealed it restarting a lot. The following was extracted from the boot log for 12-15-2021

À12 15 2021 05:51:33.500 Turned on for the day
À12 15 2021 09:02:34.500
À12 15 2021 10:14:39.500
À12 15 2021 11:09:49.500
T12 15 2021 11:17:16.500
12 15 2021 11:20:00.500
12 15 2021 11:28:31.500
12 15 2021 14:22:38.500
À12 15 2021 15:17:33.500
À12 15 2021 16:00:57.500
12 15 2021 16:09:49.500
12 15 2021 16:19:26.500
12 15 2021 16:33:37.500
12 15 2021 16:45:39.500
À12 16 2021 06:01:52.500 Next morning

Rebooted 13 times by itself on 12/15/21

The following are from the software event log that don’t show up in the windows boot log
6:32 199 cnc started
13:43 199 cnc started
14:20 exiting cnc and shutting down machine (68)
14:36 199 cnc started

We can also see the the "199 cnc started" 1113 which is too much for a 3 year old unit.

Rebooted computer at our shop on 1-4-21 without the machine and without software running, it stayed on for 9 days so far. So we can rule out the computer. we had also replaced the computer's power supply which didn't help. seems like the software is shutting down the system. any thoughts?
Attachments
IMG_0094.JPG
IMG_0093.JPG
IMG_0092.JPG
IMG_0091.JPG
IMG_0090.JPG
IMG_0089.JPG
IMG_0088.JPG
IMG_0087.JPG
IMG_0086.JPG
IMG_0085.JPG
cnckeith
Posts: 3833
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Shuts down / restarts on it's own

Post by cnckeith »

please post a fresh report.zip
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Centroid_Liviu
Posts: 397
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none

Re: Shuts down / restarts on it's own

Post by Centroid_Liviu »

From what I can see the Centroid Software was only started 3 times. So I don't see how it would have caused the other 10 shutdowns even if it was somehow triggering a PC shutdown.

Most likely explanation is the computer is losing power. I would need to see the full Windows log however. It should show if a sudden shutdown occurred.

The Centroid Software only has an option for initiating a normal PC shutdown even if it was somehow erroneously doing this. Any normal shutdown is detailed in the Centroid Log and you would see a corresponding entry in the Windows event log.

Since the PC is not losing power at your location I would see how it was wired in at the production facility. If it was wired into machine power I would trace it back and see if a power supply somewhere is dropping in and out.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
cncsnw
Posts: 2414
Joined: Wed Mar 24, 2010 5:48 pm

Re: Shuts down / restarts on it's own

Post by cncsnw »

It could also be an overheat problem.

The CPU presumably works harder and generates more heat when it is connected to a machine and running CNC12, than when it is just sitting idle at a Windows desktop. Do you have something you could run on it, on the bench, that would give the CPU a workout?
RAYMECI
Posts: 3
Joined: Thu Jan 13, 2022 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 0914182035

Re: Shuts down / restarts on it's own

Post by RAYMECI »

I'm at the customer for the day and I posted a report.

"From what I can see the Centroid Software was only started 3 times. So I don't see how it would have caused the other 10 shutdowns even if it was somehow triggering a PC shutdown."

Using 12-15-21 as an example is see the "199 CNC started" 14 times, is that the same as the centroid software starting?

when it comes to the power supply, we have replaced it with a known working one, bypassed the surge protector, and used a different circuit in the building. The computer does not share power with the machine.

I attached the windows bootlog to help out, not sure if that's the" full windows log" you are referring to...

I would like to also mention that we have the same exact setup on another machine that we can use to help diagnose, although there are permission or licensing details that'd have to be figured out.

Thanks
Attachments
ntbtlog.txt
(985.01 KiB) Downloaded 1 time
report_0914182035_2022-01-14_08-12-13.zip
(156.61 KiB) Downloaded 2 times
cnckeith
Posts: 3833
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Shuts down / restarts on it's own

Post by cnckeith »

i agree with CNCSNW, i've seen PC CPU fan loose or fallen off that would cause similar issue. easy thing to check first before anything else.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
RAYMECI
Posts: 3
Joined: Thu Jan 13, 2022 3:18 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 0914182035

Re: Shuts down / restarts on it's own

Post by RAYMECI »

I took off the back cover of the computer and located the fan. It had minor dust on it that I cleaned off and it was operational and in place.

This is getting out of our area of expertise, but, if we are thinking that its a computer problem do we want to consider swapping computers with the other machine they have? or just swap the hard drives?

I currently have the computer at my shop again....

Thanks,
cnckeith
Posts: 3833
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Shuts down / restarts on it's own

Post by cnckeith »

is the pc power supply dropping out? bad connections? pull then and reseat them.

would be good to check the full Windows log as well
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
martyscncgarage
Posts: 9441
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Shuts down / restarts on it's own

Post by martyscncgarage »

IF you swap the PC out, from a known good one from another machine, make sure both machines are running the same version of CNC12.
Make sure you get FRESH reports from both machines and put them on a USB stick. Back up the CNCM directories from both machines as well. Make sure you know which is which.
I would copy the contents of CNC12 on the problem machine to a USB stick.
On the loaner PC, RENAME the CNCM directory to something like CNCM - Loaner.
Then I would copy in the CNCM directory from the suspect machine. Should then boot up fine and run the correct configuration on the suspect machine.

In looking at the error log on the suspect machine. F7 Utility, F9 Logs, F1 Errors. You may or may not be aware of the issues. but they should be corrected as well.

Also make sure the suspect machine has quencharcs on all relays, lube pumps motors etc.
https://www.centroidcnc.com/dealersuppo ... ds/206.pdf

Just my suggestions.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply