Initial Probe Setup.
When I go to probe bore. It travels, hits the surface, backs up (X3 Times). Then throws error "Probe unable to detect surface." If it did not detect the surface, what stopped it
Thanks in Advance.
~P
Probe unable to detect surface
Moderator: cnckeith
-
- Posts: 19
- Joined: Fri Nov 26, 2021 2:38 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A901056
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Probe unable to detect surface
- Attachments
-
- report_0008DC111213-1026212647_2022-01-03_09-13-27.zip
- (2.65 MiB) Downloaded 43 times
-
- Posts: 573
- Joined: Wed Aug 29, 2018 11:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 985DADEB24D5-0309180716
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Probe unable to detect surface
What type of Touch Probe do you have? Do you really have a DSP Touch Probe because it looks like you have it configured as such.viscoelastic wrote: ↑Sun Jan 02, 2022 10:49 pm Initial Probe Setup.
When I go to probe bore. It travels, hits the surface, backs up (X3 Times). Then throws error "Probe unable to detect surface." If it did not detect the surface, what stopped it
Thanks in Advance.
~P
This is from your log file:
Code: Select all
(4) 01-01-2022 21:13:15 915 DSP window retry S0 F4 R0
(4) 01-01-2022 21:13:16 915 DSP window retry S0 F5 R0
(4) 01-01-2022 21:13:17 915 DSP window retry S0 F6 R0
(4) 01-01-2022 21:13:17 918 Probe unable to detect surface
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
-
- Posts: 19
- Joined: Fri Nov 26, 2021 2:38 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A901056
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Probe unable to detect surface
Swissi,
Thanks!! its always the simple things that kick you. Appreciate the help.
~Visco
Thanks!! its always the simple things that kick you. Appreciate the help.
~Visco
-
- Posts: 573
- Joined: Wed Aug 29, 2018 11:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 985DADEB24D5-0309180716
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Probe unable to detect surface
You are welcome.viscoelastic wrote: ↑Tue Jan 04, 2022 10:39 pm Swissi,
Thanks!! its always the simple things that kick you. Appreciate the help.
~Visco
If you want to make WCS probing easier, verify what overall, real world probing accuracy you can expect from your probe and machine and increase overall probing accuracy with Precision Probing, have a look at the ProbeApp which has been adapted to works with the Servo version of CNC12 also.
-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com