Probe unable to detect surface

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
viscoelastic
Posts: 10
Joined: Fri Nov 26, 2021 2:38 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: A901056

Probe unable to detect surface

Post by viscoelastic »

Initial Probe Setup.

When I go to probe bore. It travels, hits the surface, backs up (X3 Times). Then throws error "Probe unable to detect surface." If it did not detect the surface, what stopped it :D

Thanks in Advance.

~P
Attachments
report_0008DC111213-1026212647_2022-01-03_09-13-27.zip
(2.65 MiB) Downloaded 6 times
swissi
Posts: 522
Joined: Wed Aug 29, 2018 11:15 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 985DADEB24D5-0309180716

Re: Probe unable to detect surface

Post by swissi »

viscoelastic wrote: Sun Jan 02, 2022 10:49 pm Initial Probe Setup.

When I go to probe bore. It travels, hits the surface, backs up (X3 Times). Then throws error "Probe unable to detect surface." If it did not detect the surface, what stopped it :D

Thanks in Advance.

~P
What type of Touch Probe do you have? Do you really have a DSP Touch Probe because it looks like you have it configured as such.

This is from your log file:

Code: Select all

(4)   01-01-2022 21:13:15 915 DSP window retry S0 F4 R0
(4)   01-01-2022 21:13:16 915 DSP window retry S0 F5 R0
(4)   01-01-2022 21:13:17 915 DSP window retry S0 F6 R0
(4)   01-01-2022 21:13:17 918 Probe unable to detect surface
-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp

Contact me at swissi2000@gmail.com
viscoelastic
Posts: 10
Joined: Fri Nov 26, 2021 2:38 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: A901056

Re: Probe unable to detect surface

Post by viscoelastic »

Swissi,

Thanks!! its always the simple things that kick you. Appreciate the help.

~Visco
swissi
Posts: 522
Joined: Wed Aug 29, 2018 11:15 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 985DADEB24D5-0309180716

Re: Probe unable to detect surface

Post by swissi »

viscoelastic wrote: Tue Jan 04, 2022 10:39 pm Swissi,

Thanks!! its always the simple things that kick you. Appreciate the help.

~Visco
You are welcome.

If you want to make WCS probing easier, verify what overall, real world probing accuracy you can expect from your probe and machine and increase overall probing accuracy with Precision Probing, have a look at the ProbeApp which has been adapted to works with the Servo version of CNC12 also.

-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp

Contact me at swissi2000@gmail.com
Post Reply