I HAVE A REVOLUTION BED MILL WITH M39 CONTROL ,CPU7. WITH 4TH AXIS. I AM GETTING "FULL POWER W/O MOTION SERVO DRIVE SHUTDOWN" IN WINDOW ON SCREEN. THIS ALARM WILL DISPLAY AS X, Y, OR Z. TODAY IT OCCURRED AFTER HOMING MACHINE, BUT HAS BEEN OCCURRING MORE OFTEN, ESPCIALLY IF HEAVIER CUT OR DRILLING, OVER THE PAST FEW MONTHS. THINKING DRIVE BOARD IS BAD. ANY THOUGHTS.ATTACHED MACHINE FILES.
THANKS,
MARK
FULL POWER W/O MOTION AT RANDOM <solved>
Moderator: cnckeith
-
- Posts: 2
- Joined: Mon Nov 29, 2021 6:57 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: CPU#0408980059 --- SERIAL #AE1183 IN CABINET
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: Yes
FULL POWER W/O MOTION AT RANDOM <solved>
- Attachments
-
- REVOLUTION.zip
- (11.26 KiB) Downloaded 59 times
-
- Posts: 7292
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: FULL POWER W/O MOTION AT RANDOM
when you get FPWOM on all axes that points to the Logic power supply for the drive. so check the connections at both ends between the logic power supply and the drive for starters. pull the connectors and reseat them...more often than not thats what it is.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2
- Joined: Mon Nov 29, 2021 6:57 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: CPU#0408980059 --- SERIAL #AE1183 IN CABINET
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: Yes
Re: FULL POWER W/O MOTION AT RANDOM
THANKS,
REMOVED AND REINSERTED CONNECTIONS. SEEMS TO HVAE SOLVED TO PROBLEM.
REMOVED AND REINSERTED CONNECTIONS. SEEMS TO HVAE SOLVED TO PROBLEM.