Hola , martin
I m Rafael Almanzar hace un tiempo hablamos sobre un el uso de los drive fanuc antiguos para poder conectarlos con el control oak de centroid
Y buscando en la pagina de centroid encontre el articulo
TB 233 (REV 1) Donde explica la conexcion de estis drive anriguos al conttol oak y los servo motores 5M y 10M por medio de una targeta OPTIC 4
Me gustaria me explicar por favor si todavia eso es posible
Con las nuevas actulizaciones que han hecho y cual es el precio de dicha targeta
Muchas gracias : Rafael Almanzar
Conecting old fanuc dc drive
Moderator: cnckeith
-
- Posts: 13
- Joined: Tue Nov 16, 2021 11:32 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: 00P8DC111213-01+4211082
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Conecting old fanuc dc drive
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 13
- Joined: Tue Nov 16, 2021 11:32 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: 00P8DC111213-01+4211082
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Conecting old fanuc dc drive
Hello Marty
I'm Rafael Almanzar, a while ago we talked about the use of old Fanuc drives to be able to connect them with the centroid oak control
And searching on the centroid page I found the article
TB 233 (REV 1) Where it explains the connection of these old drives to the oak control and the 5M and 10M servo motors by means of an OPTIC 4 card
I would like to explain please if that is still possible
With the new updates they have made and what is the price of said card
Thank you very much: Rafael Almanzar
I'm Rafael Almanzar, a while ago we talked about the use of old Fanuc drives to be able to connect them with the centroid oak control
And searching on the centroid page I found the article
TB 233 (REV 1) Where it explains the connection of these old drives to the oak control and the 5M and 10M servo motors by means of an OPTIC 4 card
I would like to explain please if that is still possible
With the new updates they have made and what is the price of said card
Thank you very much: Rafael Almanzar
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Conecting old fanuc dc drive
Keith posted this link: http://www.centroidcnc.com/downloads/CE ... Manual.pdfRafael Almanzar wrote: ↑Mon Nov 27, 2023 2:24 pm Hello Marty
I'm Rafael Almanzar, a while ago we talked about the use of old Fanuc drives to be able to connect them with the centroid oak control
And searching on the centroid page I found the article
TB 233 (REV 1) Where it explains the connection of these old drives to the oak control and the 5M and 10M servo motors by means of an OPTIC 4 card
I would like to explain please if that is still possible
With the new updates they have made and what is the price of said card
Thank you very much: Rafael Almanzar
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 373
- Joined: Fri Jan 10, 2014 11:29 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Howard, PA
Re: Conecting old fanuc dc drive
OPTIC4 is from 2009. It is obsolete.Rafael Almanzar wrote: ↑Mon Nov 27, 2023 2:24 pm TB 233 (REV 1) Where it explains the connection of these old drives to the oak control and the 5M and 10M servo motors by means of an OPTIC 4 card
See the beginning of this thread. The systems were not cost effective.