Conecting old fanuc dc drive
Moderator: cnckeith
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Conecting old fanuc dc drive
martyscncgarageATgmail.com
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Conecting old fanuc dc drive
The Oak and ACDCs would be the retrofit option for those servomotors, the old drives would not be used. We have the PID info for those servomotors. Does it say Pulse Coder on the servo data-plate? If so the encoders can be reused as well.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Conecting old fanuc dc drive
Meaning he recommended and sold you the system and now won't support you?
Centroid has now answered your question. It seems you can not use the original Fanuc drives and you need to purchase the Centroid AC/DC drives. Significant added expense.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 13
- Joined: Tue Nov 16, 2021 11:32 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: 00P8DC111213-01+4211082
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Conecting old fanuc dc drive
Marty , I'cant to send the manual is 40 MB and email send only 32 MB
I send many photos there are all information for the servo drive.
Centroid liviu, thank you
Yes , it have encoder , the seevi motor are 5m and 10m yellow cap of fanuc .
Mr. belgaño say is posible to use the old drive but I want to do my self the install
I send many photos there are all information for the servo drive.
Centroid liviu, thank you
Yes , it have encoder , the seevi motor are 5m and 10m yellow cap of fanuc .
Mr. belgaño say is posible to use the old drive but I want to do my self the install
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Conecting old fanuc dc drive
Liviu told you you can't reuse the original drives. You need to purchase the Centroid AC/DC drives. You'll also need to know how to set them up.Rafael Almanzar wrote: ↑Thu Nov 18, 2021 12:57 pm Marty , I'cant to send the manual is 40 MB and email send only 32 MB
I send many photos there are all information for the servo drive.
Centroid liviu, thank you
Yes , it have encoder , the seevi motor are 5m and 10m yellow cap of fanuc .
Mr. belgaño say is posible to use the old drive but I want to do my self the install
It sounds like at first you were going to have the conversion done, and now you want to do it yourself.
Have you electrical/electronic experience and the knowledge of typical CNC control wiring in order to carry out the conversion successfully?
No need for the old Fanuc drive manual. You've been told those old drives may not be reused.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 13
- Joined: Tue Nov 16, 2021 11:32 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: 00P8DC111213-01+4211082
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Conecting old fanuc dc drive
Something like that marty
I wrote to tecnical support on 28/9/21 asking about this problem and two or three day later he call me and said will come to my business but never come
I wrote to tecnical support on 28/9/21 asking about this problem and two or three day later he call me and said will come to my business but never come
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Conecting old fanuc dc drive
Call him back and reach out to Centroid privately.Rafael Almanzar wrote: ↑Thu Nov 18, 2021 2:02 pm Something like that marty
I wrote to tecnical support on 28/9/21 asking about this problem and two or three day later he call me and said will come to my business but never come
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 13
- Joined: Tue Nov 16, 2021 11:32 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: 00P8DC111213-01+4211082
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Conecting old fanuc dc drive
I'have a little expirience and electricity and electronic and I have a brother how is electrical enginieer
I'm wiring the E stop , limit swich and VFD and
With the help of the wiring manual and you videos.
I'm wiring the E stop , limit swich and VFD and
With the help of the wiring manual and you videos.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Conecting old fanuc dc drive
Good,Rafael Almanzar wrote: ↑Thu Nov 18, 2021 4:51 pm I'have a little expirience and electricity and electronic and I have a brother how is electrical enginieer
I'm wiring the E stop , limit swich and VFD and
With the help of the wiring manual and you videos.
And I have a video on setting up a FANUC motor with AC/DC drives. Go to YouTube and search for Fanuc Centroid AC/DC
You had better reach out to Centroid for pricing....
Also, you don't need the flying lead drive cables for the Centroid AC/DC Servo drives.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 13
- Joined: Tue Nov 16, 2021 11:32 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: 00P8DC111213-01+4211082
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Conecting old fanuc dc drive
Yes , marty
I have seen seberal times is it very helpfull thank you
I have seen seberal times is it very helpfull thank you