Home file mods
Moderator: cnckeith
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Home file mods
Can I edit the cncm.hom file, or does it get overwritten by future homing cycles?
-
- Posts: 667
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: Home file mods
Yes you can, and not unless you change/write the homing config settings in the Wizard. Once you have it edited the way you want, save a backup of it for when a CNC12 update is installed.
Scott
Re: Home file mods
Since this is the Oak/Allin1DC/MPU11 section, you don't need to worry about the Wizard overwriting things.
CNC12 updates do not install a different cncm.hom file either.
CNC12 updates do not install a different cncm.hom file either.
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Home file mods
Thanks for the help guys!