TRT-32-100 Setup / Maintanence

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Sportbikeryder
Posts: 177
Joined: Thu Jan 26, 2017 11:45 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 10583
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes
Location: North Carolina

TRT-32-100 Setup / Maintanence

Post by Sportbikeryder »

Is there a parts diagram / adjustment procedure available for the TRT tilt tables? I am looking at getting our 2008 E320 dialed back in a bit better and assume there are some areas that could potentially be adjusted / tightened up to get the finishes / accuracy tweaked a bit. I have some data about resetting the rotation centers, just wondering if there are any data available relating to the tilt mechanical components themselves, even though it is pretty much an outdated product.

As much as I'd love to say we could just buy another new machine, that probably isn't gonna happen soon ;-).

John
jcowher1
Posts: 4
Joined: Fri Nov 12, 2021 2:35 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No

Re: TRT-32-100 Setup / Maintanence

Post by jcowher1 »

Please provide your full contact information to John Cowher at jcowher@centroidcnc.com and someone will get back to you with a proper response.

You can call John Cowher direct at 814-571-4955
Post Reply