Ok guys. Probably another dumb question but since I can't find the answer anywhere I'll have to ask here.
ATC system.
What does the Flood designation actually do in the tool library. ? I assumed it caused a M8 to continue after tool change and spindle start but it appears I'm wrong. Been having to add a M8 after each tool change with all my programs I ported over from a Haas mill that does it without a M8 after each tool swap. Don't see anything else parm wise I can effect that. Am I thinking about this wrong. Running standard umbrella atc plc . Will post report if needed.
Auto Coolant after tool change.
Moderator: cnckeith
-
Titleiiarms
- Posts: 55
- Joined: Mon Jul 08, 2019 8:54 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Auto Coolant after tool change.
Guy
Titleiiarms
Dilliner, PA
Titleiiarms
Dilliner, PA
-
tblough
- Posts: 3094
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Auto Coolant after tool change.
Coolant, and tool descriptions in the tool table are only used by Intercon.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.