CNC loses coordinates or X0, Y0, Z0. when the power goes out unexpectedly
Posted: Sun Oct 24, 2021 7:31 pm
Buenas, ante todo un saludo cordial para todos.
les escribo desde Venezuela, en mi Pais la electricidad falla mucho, y se corta el servicio constantemente sin previo aviso.
Tengo un Centroid Allin1DC, el problema que tengo actualmente es que con los cortes de servicio electrico al estar haciendo un mecanizado y ocurrir el corte sin aviso la maquina se apaga y al encender la maquina nuevamente no guarda los X0, Y0, Z0,con el que estaba realizando el mecanizado, es decir las coordenadas, no me conserva ni las coordenadas de maquina ni las G54.
En el momento en que la maquina se apaga, el punto donde este la maquina en ese momento, en coordenadas maquina lo asume como X0,Y0,Z0 de maquina, y al ocurrir esto pierde las configuraciones de los limites de carrera asi como tambien los 0, que inicialmente ya habia configurado.
Espero puedan entender mi consulta y puedan ayudarme a resolver. Ya he perdido material y tiempo por esta situacion, yo pienso que esta maquina debe tener alguna manera de configurar para que esto no ocurra, que al apagarse la maquina de forma repentina, al encenderla pueda continuar el trabajo donde se detuvo y no reiniciar desde el inicio.
Saludos me despido.
Hello, first of all a cordial greeting to all.
I am writing to you from Venezuela, in my country the electricity fails a lot, and the service is constantly cut off without prior notice.
I have a Centroid Allin1DC, the problem I currently have is that with the power outages when machining and cutting occurs without warning, the machine turns off and when the machine is turned on again it does not save the X0, Y0, Z0, with the that I was doing the machining, that is to say the coordinates, it does not keep me neither the machine coordinates nor the G54.
At the moment the machine is turned off, the point where the machine is at that moment, in machine coordinates it assumes it as X0, Y0, Z0 of the machine, and when this happens it loses the settings of the travel limits as well as the 0, which I had already configured initially.
I hope you can understand my query and can help me to solve it. I have already lost material and time due to this situation, I think that this machine must have some way to configure so that this does not happen, that when the machine is turned off suddenly, when it is turned on it can continue the work where it stopped and not restart from the beginning.
Greetings I say goodbye
les escribo desde Venezuela, en mi Pais la electricidad falla mucho, y se corta el servicio constantemente sin previo aviso.
Tengo un Centroid Allin1DC, el problema que tengo actualmente es que con los cortes de servicio electrico al estar haciendo un mecanizado y ocurrir el corte sin aviso la maquina se apaga y al encender la maquina nuevamente no guarda los X0, Y0, Z0,con el que estaba realizando el mecanizado, es decir las coordenadas, no me conserva ni las coordenadas de maquina ni las G54.
En el momento en que la maquina se apaga, el punto donde este la maquina en ese momento, en coordenadas maquina lo asume como X0,Y0,Z0 de maquina, y al ocurrir esto pierde las configuraciones de los limites de carrera asi como tambien los 0, que inicialmente ya habia configurado.
Espero puedan entender mi consulta y puedan ayudarme a resolver. Ya he perdido material y tiempo por esta situacion, yo pienso que esta maquina debe tener alguna manera de configurar para que esto no ocurra, que al apagarse la maquina de forma repentina, al encenderla pueda continuar el trabajo donde se detuvo y no reiniciar desde el inicio.
Saludos me despido.
Hello, first of all a cordial greeting to all.
I am writing to you from Venezuela, in my country the electricity fails a lot, and the service is constantly cut off without prior notice.
I have a Centroid Allin1DC, the problem I currently have is that with the power outages when machining and cutting occurs without warning, the machine turns off and when the machine is turned on again it does not save the X0, Y0, Z0, with the that I was doing the machining, that is to say the coordinates, it does not keep me neither the machine coordinates nor the G54.
At the moment the machine is turned off, the point where the machine is at that moment, in machine coordinates it assumes it as X0, Y0, Z0 of the machine, and when this happens it loses the settings of the travel limits as well as the 0, which I had already configured initially.
I hope you can understand my query and can help me to solve it. I have already lost material and time due to this situation, I think that this machine must have some way to configure so that this does not happen, that when the machine is turned off suddenly, when it is turned on it can continue the work where it stopped and not restart from the beginning.
Greetings I say goodbye