VCP spindle enable but no MDI <resolved>
Posted: Wed Oct 20, 2021 8:16 pm
Centroid Family,
Ive got a strange issue: I can make my spindle turn on and off using the VCP and forward/reverse as well as register my 0-10 volt
RPM command. When I try and execute an M3 or M4 in the MDI I don't get anything happening. No green lights coming on my diagnostics screen when issuing MDI commands. Wondering if I've got a parameter set incorrectly.
Thanks for the help.
Heres a report: Machine: MAZAK HTC 400
Ive got a strange issue: I can make my spindle turn on and off using the VCP and forward/reverse as well as register my 0-10 volt
RPM command. When I try and execute an M3 or M4 in the MDI I don't get anything happening. No green lights coming on my diagnostics screen when issuing MDI commands. Wondering if I've got a parameter set incorrectly.
Thanks for the help.
Heres a report: Machine: MAZAK HTC 400