Bridgeport Mill Fault Codes <resolved, loose estop wire>
Moderator: cnckeith
-
- Posts: 15
- Joined: Sun Nov 17, 2019 8:14 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 1009182051
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: East Yorkshire UK
- Contact:
Re: Bridgeport Mill Fault Codes
Carefully checked all the wiring last weekend and found a loose connection on the E-stop button. Over the last few days have run the machine for about 6 hours with no trips. I think I can safely say the problem is now resolved. Thanks for the assistance. Phil