Bridgeport Mill Fault Codes <resolved, loose estop wire>

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

compfast
Posts: 15
Joined: Sun Nov 17, 2019 8:14 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 1009182051
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: East Yorkshire UK
Contact:

Re: Bridgeport Mill Fault Codes

Post by compfast »

Carefully checked all the wiring last weekend and found a loose connection on the E-stop button. Over the last few days have run the machine for about 6 hours with no trips. I think I can safely say the problem is now resolved. Thanks for the assistance. Phil
Post Reply