Output numbering

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
repauli1
Posts: 156
Joined: Thu Jul 09, 2020 9:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Output numbering

Post by repauli1 »

On the Alt I screen the outputs are numbered 1-80 on the first screen, the Oak has 9 outputs, so is output 10 the first output on plcadd16?
And output 25=16 on plcadd16?
Thanks bob
eng199
Posts: 372
Joined: Fri Jan 10, 2014 11:29 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Howard, PA

Re: Output numbering

Post by eng199 »

The I/O is assigned by 16 bit "slots". Oak is assigned the first 16 inputs and outputs even though a few outputs aren't used. This means your PLCADD1616 inputs and outputs start at 17.
repauli1
Posts: 156
Joined: Thu Jul 09, 2020 9:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Output numbering

Post by repauli1 »

Thanks for the clarification.
Post Reply