On the Alt I screen the outputs are numbered 1-80 on the first screen, the Oak has 9 outputs, so is output 10 the first output on plcadd16?
And output 25=16 on plcadd16?
Thanks bob
Output numbering
Moderator: cnckeith
-
- Posts: 373
- Joined: Fri Jan 10, 2014 11:29 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Howard, PA
Re: Output numbering
The I/O is assigned by 16 bit "slots". Oak is assigned the first 16 inputs and outputs even though a few outputs aren't used. This means your PLCADD1616 inputs and outputs start at 17.
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Output numbering
Thanks for the clarification.