ATC F7 Tool cycle issue - ALT S dont work

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Titleiiarms
Posts: 55
Joined: Mon Jul 08, 2019 8:54 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No
Contact:

ATC F7 Tool cycle issue - ALT S dont work

Post by Titleiiarms »

Been complaining about ATC tool loading procedure and not being able to rotate the unbrella using the ATC F7 button in the menu. I hit the button , ,type in a tool number thats not in the spindle, hit alt S on the keyboard and it does nada. Turns out I got my Pendant in today and happen to try that procedure again but hit the GREEN start button this time... IT WORKED. Now that I know.... :) For anyone else that loves the keyboard commands.. BEWARE.
Last edited by Titleiiarms on Fri Sep 10, 2021 7:12 pm, edited 2 times in total.
Guy
Titleiiarms
Dilliner, PA
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: ATC F7 Tool cycle issue - CTRL S dont work

Post by martyscncgarage »

Cycle start Keyboard short cut is ALT s
https://www.centroidcnc.com/centroid_di ... legend.pdf
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Titleiiarms
Posts: 55
Joined: Mon Jul 08, 2019 8:54 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No
Contact:

Re: ATC F7 Tool cycle issue - CTRL S dont work

Post by Titleiiarms »

Lol. Yea. That's what I meant.. still no work. No biggie . I'll use the green button.
Guy
Titleiiarms
Dilliner, PA
Post Reply