Yea. I saw ur post about that and many other posts about DMM issues. Just hard to spend 3 times the price for"name brand" drives. The autotune functions seem way off even when done installed on machine. The more I ran autotune the worse they got. I ended up at 15 15 15 for gains I think they called it for the first settings and 100 for the last "filter parm" The autotune always dropped that last number into the 20s and it made scraping noises..
Guy
OAK CarouseIN issue. One air coil solenoid.
Moderator: cnckeith
-
- Posts: 55
- Joined: Mon Jul 08, 2019 8:54 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: OAK CarouseIN issue. One air coil solenoid.
Guy
Titleiiarms
Dilliner, PA
Titleiiarms
Dilliner, PA
-
- Posts: 55
- Joined: Mon Jul 08, 2019 8:54 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: OAK CarouseIN issue. One air coil solenoid.
U want to send me the gcode and I'll see how it runs here?
Guy
Titleiiarms
Dilliner, PA
Titleiiarms
Dilliner, PA
-
- Posts: 399
- Joined: Thu Dec 03, 2020 4:54 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: OAK CarouseIN issue. One air coil solenoid.
That would be awesome thanks. The code can be found in the fourth post down here:
viewtopic.php?f=64&t=6181
Oh yeah. A warning directly from Centroid "Dont go over 120% feedrate override. Ever". They wont say why...
viewtopic.php?f=64&t=6181
Oh yeah. A warning directly from Centroid "Dont go over 120% feedrate override. Ever". They wont say why...
Re: OAK CarouseIN issue. One air coil solenoid.
Regarding M80 and M81:
As written, your PLC program only recognizes Aux14 on the physical jog panel pendant (pn11077) as "AtcOverrideKey_I".
Most of the existing Oak/Allin1DC PLC programs were written on the assumption that a physical jog panel is part of the control. Revising all of them to work with the VCP is a project that no one seems to have time for.
If you replace each reference to "AtcOverrideKey_I" with "(AtcOverrideKey_I || SkinAux14_M)", save, and recompile, then that function should work with the VCP.
As written, your PLC program only recognizes Aux14 on the physical jog panel pendant (pn11077) as "AtcOverrideKey_I".
Most of the existing Oak/Allin1DC PLC programs were written on the assumption that a physical jog panel is part of the control. Revising all of them to work with the VCP is a project that no one seems to have time for.
If you replace each reference to "AtcOverrideKey_I" with "(AtcOverrideKey_I || SkinAux14_M)", save, and recompile, then that function should work with the VCP.
-
- Posts: 55
- Joined: Mon Jul 08, 2019 8:54 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: OAK CarouseIN issue. One air coil solenoid.
Cool..nice to know. Think I'll be happy with the real hunk of metal and switches on the real deal. Old people like actual buttons:)
Guy
Guy
Guy
Titleiiarms
Dilliner, PA
Titleiiarms
Dilliner, PA