hi all,
would like to talk/email people who have experience with the oak controller and linuxcnc.
any help/advice is greatly appreciated
oak controller and linuxcnc
Moderator: cnckeith
-
- Posts: 1
- Joined: Sun Aug 15, 2021 12:10 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 368
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
Re: oak controller and linuxcnc
The search facility usually helps get you started as follows:
search.php?keywords=linuxcnc&terms=all& ... mit=Search
If that doesn't help, post your questions on this Forum. This is precisely what its for
search.php?keywords=linuxcnc&terms=all& ... mit=Search
If that doesn't help, post your questions on this Forum. This is precisely what its for
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"
Re: oak controller and linuxcnc
To the best of my knowledge, the Oak control unit does not work with LinuxCNC. It works with Centroid CNC11 and CNC12 software.