I am sure that someone out there in the ether knows how to do this. System is an M400, #100030, running CNC11. The operator wants Notepad to open Maximized when pressing F6-Edit. Currently, it only opens minimized. I did try maximizing Notepad, then holding down the CTRL key, then closing Notepad, but this did not work. Any ideas? Thank You in advance.
Jeffrey
Maximize Notepad
Moderator: cnckeith
-
- Posts: 67
- Joined: Mon Apr 27, 2020 2:09 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Maximize Notepad
- Attachments
-
- report_0215171689_2021-07-19_00-20-05.zip
- (264.29 KiB) Downloaded 85 times
-
- Posts: 61
- Joined: Sun Dec 24, 2017 11:49 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: Maximize Notepad
Here's a few ideas for you:
http://hinditechy.com/force-open-maximi ... ll-screen/
https://answers.microsoft.com/en-us/win ... d7b?auth=1
My first instinct tells me that maybe CNC11 is preventing an app in fullscreen from covering up the VCP area or other critical controls for safety reasons.
http://hinditechy.com/force-open-maximi ... ll-screen/
https://answers.microsoft.com/en-us/win ... d7b?auth=1
My first instinct tells me that maybe CNC11 is preventing an app in fullscreen from covering up the VCP area or other critical controls for safety reasons.
Brady Watson | IBILD Solutions | Production Consultant | HiDef 3D Laser Scanning | Vectric Custom Video Training | IBILD.com
-
- Posts: 67
- Joined: Mon Apr 27, 2020 2:09 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Maximize Notepad
Thanks, will give it a try the next time I am at the client.