wired mpg

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Captainsteampunk
Posts: 2
Joined: Sun Dec 08, 2019 5:46 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: a900916
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: australia
Contact:

wired mpg

Post by Captainsteampunk »

hello everyone can anyone tell me is the output on the wired mpg #11069 a point to point or is it a binary coded signal thanks for any help ...terry
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: wired mpg

Post by cncsnw »

Discrete signals. See any recent Oak or Allin1DC system schematic for the connector pinout.
Such as this one (bottom center):
https://www.centroidcnc.com/dealersuppo ... 028.r2.pdf

A differential encoder is required (A, /A, B, /B).
Captainsteampunk
Posts: 2
Joined: Sun Dec 08, 2019 5:46 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: a900916
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: australia
Contact:

Re: wired mpg

Post by Captainsteampunk »

thanks but thats got me more confused discrete signals????
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: wired mpg

Post by tblough »

Did you look at the bottom center of the schematic Marc posted? It clearly shows the wiring for the MPG.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: wired mpg

Post by martyscncgarage »

Captainsteampunk wrote: Fri Jul 23, 2021 4:08 am thanks but thats got me more confused discrete signals????
The handwheel is just an enocder basically.
What are you trying to accomplish? Put your own encoder together? Put a handwheel on a custom built console?
I have two of the appropriate MPGs (New) and I believe the connectors if you want to pin out your own. $165 shipped.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply