Upgrade Intercon only to get DXF input

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Aplus
Posts: 37
Joined: Wed Mar 20, 2019 2:15 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: A900730
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Upgrade Intercon only to get DXF input

Post by Aplus »

On the software download page it states you can select only to upgrade intercon when doing an upgrad but the only option I see is to upgrade offline intercon. Which I don't have. Am I missing something? I have everything working with V4.16 and didn't want to disrupt that.
Attachments
report_0008DC111213-0311192178_2020-11-04_15-33-51.zip
(5.95 MiB) Downloaded 91 times
polaraligned
Posts: 231
Joined: Mon Feb 07, 2011 8:03 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1030090103
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Montvale, NJ

Re: Upgrade Intercon only to get DXF input

Post by polaraligned »

Probably better off upgrading to Version 4.20 that has DXF import built right in. The Version 4.20 download is here for Centroid Servo. https://www.centroidcnc.com/centroid_di ... loads.html

You should make a report before you do the upgrade and then do a restore report to get all your settings back. Also, it is a good idea to back up your whole cncm file folder for custom macros, etc.
Aplus
Posts: 37
Joined: Wed Mar 20, 2019 2:15 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: A900730
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Upgrade Intercon only to get DXF input

Post by Aplus »

I don't see a version 4.20 or a version for just the AllinOne board. I currently have V4.16. Can I jump to V4.64 or do I have to go to V 4.20 first? Is the software the same as Acorn?
V4.64.JPG
Centroid_Liviu
Posts: 428
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: Upgrade Intercon only to get DXF input

Post by Centroid_Liviu »

Scroll down a bit farther on the page. You will see the download link for Oak/ALLIN1DC.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Aplus
Posts: 37
Joined: Wed Mar 20, 2019 2:15 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: A900730
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Upgrade Intercon only to get DXF input

Post by Aplus »

Is it a free upgrade or is there a charge for the liscense file?
polaraligned
Posts: 231
Joined: Mon Feb 07, 2011 8:03 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1030090103
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Montvale, NJ

Re: Upgrade Intercon only to get DXF input

Post by polaraligned »

It is free.
Post Reply