What am I doing wrong or missing here Uh..
Moderator: cnckeith
-
- Posts: 4
- Joined: Wed Apr 28, 2021 11:19 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A900325
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
What am I doing wrong or missing here Uh..
Guys couple questions with some alarms @ my startup(see pics) issues with X O/T, pendant buttons looks like they work cus lights change on the keys and here board relays open/close, can get spindle to start(motor infor on parameters) Could this be that the limits voltage is wrong? I can't jog and when I press cycle start got themat warning, any help will be nice, thanks.
Re: What am I doing wrong or missing here Uh..
Did you turn on scale feedback for one or more axes on purpose, or accidentally?
Did you look at your limit switch inputs (INP1 - INP6) on the Alt-i screen? Were any of them red?
The flashing "4." on the LED1 display suggests that one or more limits are open.
If you do not have an MPG handwheel plugged in, you should change Parameter 348 to a value of zero.
Did you look at your limit switch inputs (INP1 - INP6) on the Alt-i screen? Were any of them red?
The flashing "4." on the LED1 display suggests that one or more limits are open.
If you do not have an MPG handwheel plugged in, you should change Parameter 348 to a value of zero.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: What am I doing wrong or missing here Uh..
Please also remember to include a fresh report when asking for help.
F7 Utility
F7 Create Report
The report contains all the machine settings and logs
Also, is this a new build/conversion?
Marty
F7 Utility
F7 Create Report
The report contains all the machine settings and logs
Also, is this a new build/conversion?
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ