Page 2 of 2

Re: Get help with machine troubleshooting

Posted: Wed Jun 02, 2021 10:30 am
by eng199
Việt Đức wrote: Mon May 31, 2021 5:17 am Did you check the report file and see no damage?
I don't see any sign of damage in report.

Re: Get help with machine troubleshooting

Posted: Wed Jun 02, 2021 11:23 am
by aamir
Its a break motor thoroughly check x brake is release or not .

Re: Get help with machine troubleshooting

Posted: Thu Jun 03, 2021 2:04 am
by Việt Đức
I took the brakes off, mate!

Re: Get help with machine troubleshooting

Posted: Thu Jun 03, 2021 10:29 am
by eng199
Did you try what I posted earlier... like this part:
The HSC screen shows a list of drive status bits. LineVoltageOn should be 1 when the estop is released.


The report looks like you have no voltage.

Re: Get help with machine troubleshooting

Posted: Sun Jun 06, 2021 3:51 am
by Việt Đức
Can you walk me through the test steps with pictures or videos? Thank you!

Re: Get help with machine troubleshooting

Posted: Mon Jun 07, 2021 8:04 am
by eng199
I don't have that kind of control system set up to demonstrate it right now.
The keys to get from the main screen to HSC are: <F7 - Utility>, <F9 - Logs>, <F5 - HSC> .
LineVoltageOn value for each drive should change within a few seconds of changing Estop state.