Get help with machine troubleshooting

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

eng199
Posts: 190
Joined: Fri Jan 10, 2014 11:29 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Howard, PA

Re: Get help with machine troubleshooting

Post by eng199 »

Việt Đức wrote: Mon May 31, 2021 5:17 am Did you check the report file and see no damage?
I don't see any sign of damage in report.
aamir
Posts: 31
Joined: Fri Jun 10, 2011 8:31 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none

Re: Get help with machine troubleshooting

Post by aamir »

Its a break motor thoroughly check x brake is release or not .
Việt Đức
Posts: 11
Joined: Mon May 17, 2021 10:42 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC12: No
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none

Re: Get help with machine troubleshooting

Post by Việt Đức »

I took the brakes off, mate!
eng199
Posts: 190
Joined: Fri Jan 10, 2014 11:29 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Howard, PA

Re: Get help with machine troubleshooting

Post by eng199 »

Did you try what I posted earlier... like this part:
The HSC screen shows a list of drive status bits. LineVoltageOn should be 1 when the estop is released.


The report looks like you have no voltage.
Việt Đức
Posts: 11
Joined: Mon May 17, 2021 10:42 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC12: No
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none

Re: Get help with machine troubleshooting

Post by Việt Đức »

Can you walk me through the test steps with pictures or videos? Thank you!
eng199
Posts: 190
Joined: Fri Jan 10, 2014 11:29 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Howard, PA

Re: Get help with machine troubleshooting

Post by eng199 »

I don't have that kind of control system set up to demonstrate it right now.
The keys to get from the main screen to HSC are: <F7 - Utility>, <F9 - Logs>, <F5 - HSC> .
LineVoltageOn value for each drive should change within a few seconds of changing Estop state.
Post Reply