New owner of a mill with an acorn on it

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
MandalaRose
Posts: 1
Joined: Fri May 14, 2021 5:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0719192294
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

New owner of a mill with an acorn on it

Post by MandalaRose »

Currently, my x1 button jogs in increments of 0.001", x10 is 0.0100" and x100 is 0.1000". I need x1 to jog in increments of 0.0001". Can anyone tell me how to fix this?

I am running v4.5 pro.

Thanks,
Wade
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: New owner of a mill with an acorn on it

Post by cncsnw »

Change Machine Parameter 40 to 0.0001
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: New owner of a mill with an acorn on it

Post by martyscncgarage »

MandalaRose wrote: Fri May 14, 2021 5:06 pm Currently, my x1 button jogs in increments of 0.001", x10 is 0.0100" and x100 is 0.1000". I need x1 to jog in increments of 0.0001". Can anyone tell me how to fix this?

I am running v4.5 pro.

Thanks,
Wade
If it an Acorn system, its in the Wizard, F7 Utilities, F10 Wizard
Bottom of AXIS Configuration Page

What Marc told you is correct as well.
DO Post a Fresh Report, F7 Utilities F7 Create Report.

Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: New owner of a mill with an acorn on it

Post by cnckeith »

please upgrade to v4.64 as well. its free and there are many improvements and fixes included. more info here.
viewtopic.php?f=60&t=3397
and here.
https://www.centroidcnc.com/centroid_di ... loads.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply