Currently, my x1 button jogs in increments of 0.001", x10 is 0.0100" and x100 is 0.1000". I need x1 to jog in increments of 0.0001". Can anyone tell me how to fix this?
I am running v4.5 pro.
Thanks,
Wade
New owner of a mill with an acorn on it
Moderator: cnckeith
-
- Posts: 1
- Joined: Fri May 14, 2021 5:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0719192294
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: New owner of a mill with an acorn on it
Change Machine Parameter 40 to 0.0001
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: New owner of a mill with an acorn on it
If it an Acorn system, its in the Wizard, F7 Utilities, F10 WizardMandalaRose wrote: ↑Fri May 14, 2021 5:06 pm Currently, my x1 button jogs in increments of 0.001", x10 is 0.0100" and x100 is 0.1000". I need x1 to jog in increments of 0.0001". Can anyone tell me how to fix this?
I am running v4.5 pro.
Thanks,
Wade
Bottom of AXIS Configuration Page
What Marc told you is correct as well.
DO Post a Fresh Report, F7 Utilities F7 Create Report.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 7322
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: New owner of a mill with an acorn on it
please upgrade to v4.64 as well. its free and there are many improvements and fixes included. more info here.
viewtopic.php?f=60&t=3397
and here.
https://www.centroidcnc.com/centroid_di ... loads.html
viewtopic.php?f=60&t=3397
and here.
https://www.centroidcnc.com/centroid_di ... loads.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html