I've been using Fusion 360 to build toolpaths for parts for a couple months now, using the built in CENTROID CND postprocessor, and never major problems until recently. I can upload the .ptp, but the controller is refusing to do anything after loading the file, only displaying "417: Abnormal end of job". I've tried looking at the G-code and comparing it to previous files that worked and having no luck finding anything out of the ordinary. Also tried looking into the error message in the manual, however they aren't incredibly helpful. Google also fails to return any meaningful results. Any help would be greatly appreciated.
Thank you!
CNC11 mill error code 417 when using file post processed from Fusion360 <resolved>
Moderator: cnckeith
-
- Posts: 3
- Joined: Wed May 12, 2021 11:12 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0327120413
- DC3IOB: No
- CNC12: No
- CNC11: Yes
- CPU10 or CPU7: No
- Contact:
CNC11 mill error code 417 when using file post processed from Fusion360 <resolved>
- Attachments
-
- 9501.ptp.txt
- (18.98 KiB) Downloaded 109 times
-
- Posts: 231
- Joined: Mon Feb 07, 2011 8:03 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090103
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Montvale, NJ
Re: CNC11 mill error code 417 when using file post processed from Fusion360
What kind of machine are you running?
Does it start to graph the part before error?
Have you always used a .ptp extension? What happens if you change the extension to .nc?
Post a report.
Does it start to graph the part before error?
Have you always used a .ptp extension? What happens if you change the extension to .nc?
Post a report.
-
- Posts: 3101
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: CNC11 mill error code 417 when using file post processed from Fusion360
You are using a 9000 series file number which is for sub-programs without an M99 to end the subprogram.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 573
- Joined: Wed Aug 29, 2018 11:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 985DADEB24D5-0309180716
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: CNC11 mill error code 417 when using file post processed from Fusion360
Have a look at my CNC12 specific Fusion 360 Post Processor in this POST.ilstuscrt wrote: ↑Wed May 12, 2021 11:27 am I've been using Fusion 360 to build toolpaths for parts for a couple months now, using the built in CENTROID CND postprocessor, and never major problems until recently. I can upload the .ptp, but the controller is refusing to do anything after loading the file, only displaying "417: Abnormal end of job". I've tried looking at the G-code and comparing it to previous files that worked and having no luck finding anything out of the ordinary. Also tried looking into the error message in the manual, however they aren't incredibly helpful. Google also fails to return any meaningful results. Any help would be greatly appreciated.
Thank you!
Here's the User Guide describing all the CNC12 specific features .
-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
-
- Posts: 3
- Joined: Wed May 12, 2021 11:12 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0327120413
- DC3IOB: No
- CNC12: No
- CNC11: Yes
- CPU10 or CPU7: No
- Contact:
Re: CNC11 mill error code 417 when using file post processed from Fusion360
Thanks for the reply but renaming the file fixed it.polaraligned wrote: ↑Wed May 12, 2021 12:57 pm What kind of machine are you running?
Does it start to graph the part before error?
Have you always used a .ptp extension? What happens if you change the extension to .nc?
Post a report.
Just in case it helps someone in the future with a similar problem, I'm running an Atrump AONE 3VKNC 3 axis cnc knee mill.
It was not graphing
And we've always used a .ptp extension. We used to do most of the CAM in NX which exports a .ptp file. Files with the .nc extension produce the same error.