Manual tuning of DMM, HOME NOT SET

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
repauli1
Posts: 24
Joined: Thu Jul 09, 2020 9:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Manual tuning of DMM, HOME NOT SET

Post by repauli1 »

How can I bypass home not set while commissioning drives?
cncsnw
Posts: 2025
Joined: Wed Mar 24, 2010 5:48 pm

Re: Manual tuning of DMM, HOME NOT SET

Post by cncsnw »

Just run "M26/X/Y/Z" from the MDI prompt, to set home wherever it sits.

Presumably you do not have software travel limits entered yet. If you do, you will want to jog it close to the home position before you set home that way.
repauli1
Posts: 24
Joined: Thu Jul 09, 2020 9:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Manual tuning of DMM, HOME NOT SET

Post by repauli1 »

Thanks!
Post Reply