When I power on any of my 4 servos (DMM DYN4 1.8KW) the 101keyboard stops functioning. The on-screen keys continue to work. I am referring to the Centroid touchscreen workstation.
Any ideas, I am commissioning so the only thing grounded is the 120vac power supply. The dyn4 drives are grounded, but not to electrical panel yet.
Trouble with keyboard
Moderator: cnckeith
-
- Posts: 3100
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Trouble with keyboard
Is the 101 keyboard wireless or USB? If wireless, I suspect noise from the drives.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Trouble with keyboard
No it's USB, when I cycle off drive breaker, sometimes the keyboard comes alive, other times I need to unplug, and reinsert into USB. I am going to try running a temporary ground wire across the floor to ground point on main breaker panel.
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Trouble with keyboard
Grounding drives took care of issue. Thanks Tom