I am installing a new computer in my mill and I was wondering which file I should back up so I don't lose my Ajax config files. Everything is working well, but I'm having some computer problems, so I need to change it out. I'm running with Mach3. I'm really enjoying my Ajax Conversion!
Thanks,
Dan
New computer. Which files to back up in Mach3
Moderator: cnckeith
-
- Posts: 34
- Joined: Tue Mar 22, 2011 9:59 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: New computer. Which files to back up in Mach3
Please check out This Tread for specifics.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 34
- Joined: Tue Mar 22, 2011 9:59 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: New computer. Which files to back up in Mach3
Thanks for the quick reply, It's really appreciated. I have my new computer up and running. Windows XP Pro. I was able to copy the whole Mach file so I don't thnk I'll have a problem getting back up and running. Unfortunately my controller is not communicating with the network adaptor. Can you tell what IP address I should be using in the new netwok card?
Thanks again for the quick reponse,
Dan
Thanks again for the quick reponse,
Dan
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: New computer. Which files to back up in Mach3
The IP address is 10.168.41.1 and the subnet mask is 255.255.255.0 . These would need to be set manually for the Ethernet card.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)