Lost my vcp again...

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
tradin1
Posts: 11
Joined: Fri Nov 06, 2020 2:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Lost my vcp again...

Post by tradin1 »

Does anyone have a solution for this? I’m not making any changes. This is the third time this week. I have to do a restore to before it started happening.
Attachments
162B33E2-FF91-42FE-BA70-264AC385B121.jpeg
tblough
Posts: 1401
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
Location: Boston, MA
Contact:

Re: Lost my vcp again...

Post by tblough »

Have you run chkdsk on your drive? Something is corrupting the file.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
tradin1
Posts: 11
Joined: Fri Nov 06, 2020 2:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Lost my vcp again...

Post by tradin1 »

no i have not. this just started a few days ago. what exactly is chkdsk?
tblough
Posts: 1401
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
Location: Boston, MA
Contact:

Re: Lost my vcp again...

Post by tblough »

It's a Windows utility to check a disk drive for bad sectors. Click the start button and type chkdsk.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
martyscncgarage
Posts: 7883
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Lost my vcp again...

Post by martyscncgarage »

tradin1 wrote: Wed Mar 17, 2021 6:54 pm Does anyone have a solution for this? I’m not making any changes. This is the third time this week. I have to do a restore to before it started happening.
Do post a FRESH Report....might help with diagnosing what's going on
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
tradin1
Posts: 11
Joined: Fri Nov 06, 2020 2:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Lost my vcp again...

Post by tradin1 »

I’m not sure how it got fixed but after my update to 4.20 I have not experienced this problem again.
martyscncgarage
Posts: 7883
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Lost my vcp again...

Post by martyscncgarage »

We're at 4.64 now ...
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
swissi
Posts: 471
Joined: Wed Aug 29, 2018 11:15 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 985DADEB24D5-0309180716

Re: Lost my vcp again...

Post by swissi »

martyscncgarage wrote: Mon Mar 22, 2021 9:24 pm We're at 4.64 now ...
This is the servo forum Marty. The latest for servo is version 4.20 :)

-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp

Contact me at swissi2000@gmail.com
martyscncgarage
Posts: 7883
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Lost my vcp again...

Post by martyscncgarage »

swissi wrote: Mon Mar 22, 2021 10:54 pm
martyscncgarage wrote: Mon Mar 22, 2021 9:24 pm We're at 4.64 now ...
This is the servo forum Marty. The latest for servo is version 4.20 :)

-swissi
I stand corrected Lol! 😳😁
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply