Fired up the machine. The usual pop up window to home the machine did not appear.
Manually discovered that all my axis limits were fubar.
Tried a shut down and reboot to no avail more than once.
Lost it's mind.
No clue where to start.
Report
Homing got lost. This can't be good. (Resolved)
Moderator: cnckeith
-
- Posts: 112
- Joined: Fri Apr 13, 2018 10:04 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 101981
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Homing got lost. This can't be good.
Fixed it. I had fumble fingered Parm. 5 which told it not to do the homing.
Thanks Marc at cncsnw for the look see.
Thanks Marc at cncsnw for the look see.
Dave Koehler
https://www.koehlerinjection.com
https://www.koehlerinjection.com