OK. So I have my new Win 10 computer installed and running CNC12 ver 4.20.
Previously, I was running CNC12 ver 4.18 on Win 7.
Is it OK to do a Restore Report?
Only reason I ask is because I saw a thread in the Acorn section where the guy was upgrading from a Beta version of lathe and he was told NOT to do a restore report and he had to enter all parameters, etc over again. I think he was warned that doing a restore report would overwrite some newer updated software.
Your advice Marty or anyone else who might know?
Need Advice on a Path to Upgrade to Probing
Moderator: cnckeith
-
- Posts: 231
- Joined: Mon Feb 07, 2011 8:03 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090103
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Montvale, NJ
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Need Advice on a Path to Upgrade to Probing
yep you can use restore report.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Need Advice on a Path to Upgrade to Probing
I was nearly certain it's not a problem with CNC12 Servo, but wanted Keith to chime in.polaraligned wrote: ↑Fri Apr 23, 2021 8:35 am OK. So I have my new Win 10 computer installed and running CNC12 ver 4.20.
Previously, I was running CNC12 ver 4.18 on Win 7.
Is it OK to do a Restore Report?
Only reason I ask is because I saw a thread in the Acorn section where the guy was upgrading from a Beta version of lathe and he was told NOT to do a restore report and he had to enter all parameters, etc over again. I think he was warned that doing a restore report would overwrite some newer updated software.
Your advice Marty or anyone else who might know?
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 231
- Joined: Mon Feb 07, 2011 8:03 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090103
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Montvale, NJ
Re: Need Advice on a Path to Upgrade to Probing
Thanks Marty. It is up and running now. Being able to do a "restore report" made it a whole lot easier. Hopefully this weekend I will get the probe attached and working. It has been sitting in the box for several weeks waiting for me to get far enough along.martyscncgarage wrote: ↑Fri Apr 23, 2021 10:59 pm
I was nearly certain it's not a problem with CNC12 Servo, but wanted Keith to chime in.
Marty